A level base for your PVC edging. Effortlessly!
If your edging does not sit down tight on your compacted gravel
base, the sand will migrate out and cause your edge
to lose all stability. Thus causing the installation to fail.
The Quick-E-Sand Plow effortlessly glides along the top
of your paver edge while plowing the sand out away
from the paver allowing a perfect setting bed on the
gravel for the PVC edging.
NOTE: this tool accommodates the interchangable Quick-E-Handle (sold separately).
One of the biggest reasons a project can fail is an improperly installed edge restraint (PVC edging).
INSTRUCTIONS:
To use the Quick-E-Sand Plow simply loosen the two large black knobs and
slide the plate up or down until the desired paver height (in millimeters) is lined up with the top of the plate. By doing this, you will automatically be set to the correct height if you are using 1" screed pipes. Once set, firmly drag the Quick-E-Sand Plow along the edge of your paver surface to plow the sand away and expose the compacted gravel below. This prepares a perfect base on which the PVC edging is to rest and get spiked into. Be sure to keep the plow firmly against the paver edge at all times. Calibrated for depths from 2-3/4" to 6" (7 cm to 15 cm).
Ask for the Quick-E-SAND PLOW at your local Techo-Bloc dealer.
Paver Tool Innovators, LLC