No more knee pads full of sand.
The Quick-E-Screeder is a combined 3' and 6' long screeder. It's made of durable
lightweight aluminum. You will find it not only easy to use, but also a lot less
stressful on your knees and back. The Quick-E-Screeder
quickly disassembles into two pieces for easier transport.
This tool accommodates the Quick-E-Handle (sold separately).
It has been a favorite of everyone who uses it, because it allows you to screed standing up.
INSTRUCTIONS:
To assemble the Quick-E-Screeder, undo the wing nuts and place
the loose piece of the screeder onto the studs and simply retighten. To use the tool as a 3’ screeder, undo both pieces of
aluminum and remount one 3‘ piece in the center of the mounting bracket. Next, adjust the handle angle by removing the rubber
knob and the carriage bolt and then reassemble at the desired angle. To use the Quick-E-Screeder, simply lay your screed rails
approximately 5’ apart. Dump or shovel your sand between your screed rails. Using your Quick-E-Screeder, roughly spread your
sand. Starting again at the beginning of your rails and pull or push the screeder back and forth to leave a perfect
sand setting bed.
Ask for the Quick-E-SCREEDER at your local Techo-Bloc dealer.
Paver Tool Innovators, LLC